1. Press the centre of the pusher to wind

2. The chain will move up

3. Avoid pressing on the edges of the pusher

Logical One Secret is a manual winding timepiece. To wind it, press the integrated caseband pusher fully in towards the case. Between pushes, release the pusher so it fully comes back out again. 

Important: Press on the very centre of the pusher. Avoid pressing on the edges of the pusher. 

1. Pull out the crown

2. Turn clockwise or anticlockwise

The time is set on Logical One using the small crown on the caseband at 2 o'clock. To set the time, gently pull out the crown and turn clockwise or anticlockwise to the correct time. When the correct time is set, push the crown back in towards the case. 

Important: Do not pull the crown out if the watch is wet or in water. 

1. Mainspring barrel

2. Power reserve indicator

The power reserve indicator is visible on the back of the movement and shows the state of wind of the mainspring from "OFF" (no power) to "POWER ON" to "FULL" (46 hours of power reserve). 

To go from "OFF" to "FULL'', no more than 65 pushes are required. 
Given that the movement features a constant-force mechanism, the watch need not be fully wound for optimal timekeeping precision; the precision is constant at any state of wind. 
Important: Always stop winding when the indicator reads "FULL''. 

Power reserve minimum.

Power reserve maximum.

Reading power reserve dial side.
In addition to the power reserve indicator on the back of the watch, the approximate power reserve can be seen at a glance on the dial side by the position of the snail cam (to the left of the hour­minutes subdial) and chain. 

When the small step in the snail cam is at 9 o'clock the power is at zero (power reserve minimum) and your watch requires winding to start working. 

Important: Stop winding Logical One when the chain has circled the small step in the cam (power reserve maximum). 

Water resistance 
Your Logical One is water resistant to a static 30metres/100ft. However, vigorous swimming and diving should be avoided as moisture may be forced past the water-resistant seals. 

Maintenance 
Your Logical One has taken years to design, months to create the components for it, weeks to finish by hand and days to assemble and regulate. With care, it will last many generations. 
Before delivery, it has been checked and tested to the highest standards. For a description of these tests and for a list of our tips for looking after your timepiece, please click here.

Service 
We recommend sending your Logical One back to Manufacture Romain Gauthier for service at least once every three years. Your nearest authorised Romain Gauthier retailer can help you to do this. You can also contact us.
A service sees your timepiece returned to the expert Romain Gauthier watchmaker who originally assembled and regulated it, ensuring continuity and quality. For full details of what a service entails, please visit romaingauthier.com/owners. 
When returning your watch for service, to ensure safe shipping we suggest putting the timepiece in the plastic 'membrane' case that came with the watch, then placing this plastic case in a sizeable cardboard box with protective polystyrene filling.